Vorza 3.5 Buggy, 1/8 4WD RTR Big Block Nitro w/2.4GHz Radio
HPI160177
Under the body, each new Vorza Buggy has a ton of great durability and tuning features that make each one a joy to drive with a clear upgrade path to the "S" spec and beyond! The Vorza takes the race-winning design and mixes it up with the HPI Nitro Star F3.5 V2 to give you awe-inspiring speed and handling! This is a ready to run (RTR) Buggy that you can take to BMX jumps for hair-raising big-air thrills, and then you can take it straight to any track for top-level racing action - it will turn heads and amaze your friends!
The RTR Vorza Nitro chassis has a wide range of excellent features, esteemed performance heritage, amazingly powerful engine, loads of adjustability in the suspension and a tunable drivetrain, if you want to experiment to tune your Vorza Nitro to your liking.
The 2022 spec Vorza line-up features the same Worlds-conquering design that has beaten the best of the best on the racing track! A full suite of top-level race car features makes sure that you can attack the racing line straight out of the box!
Features:
Factory-assembled & pre-painted 4WD 1/8 scale Car
Pre-painted body with awesome speed graphics
Pre-mounted all-terrain tires
High torque metal geared steering Servo
Nitro Star F3.5 V2 Engine
Full-time 4WD for excellent control
Efficient and tough shaft drivetrain with front universals
16mm Big Bore oil-filled shocks for confident control
4mm aluminum front and rear shock tower
4mm aluminium chassis
Easy-Tune Dual Brake Disc Setup
Cast aluminium engine mount
Composite chassis braces for extra driving feel
Super thick top links
Fuel tank clunk helps engine stay running if car is upside-down
Quick access to all critical maintenance points
Loads of adjustability: roll centre, wheelbase, camber, sway bar and more
Easy radio tray removal for maintenance and cleaning
HD High-Impact composite suspension blocks front and rear
Front and rear sway bars for excellent handling
Hardened steel spur and clutch bell for extreme durability
Spiral-cut bevel gears for the best balance of strength and efficiency
Tough 4-gear differentials
Suspension based on World Championship pedigree
Super low CoG for superior handling
Nylon stone and dirt guards keep rocks out of the chassis
Dual bellcrank steering
Cam type servo saver
All hex head race spec hardware
Full set of rubber-sealed ball bearings
2.4GHz Radio Set with waterproof receiver
WHAT YOU NEED:
20-25% Nitromethane fuel,
Glow igniter, fuel bottle, (#160177 Nitro Starter pack - USB)
RX battery for car (#160153 Plazma 1600mAh NiMH RX battery Pack)
RX battery charger
4 x AA Batteries for Transmitter (#101939 Plazma AA 1.5v Alkaline batteries 4pcs)Length: 508mm; Width: 205mm; Height: 178mm; Wheelbase: 325mm Drivetrain: Shaft 4WD Engine Nitro Star F3.5 V2: 2.5 horsepower; ABC construction; Finned aluminum crankcase 2.4Ghz FHSS TF-50 Transmitter: Servo Reverse; EPA; Trims and Dual Rate switches. Required to Complete: Fuel, Glow Igniter, Fuel Bottle, Rx battery, charger, 4 AA Batteries
The RTR Vorza Nitro chassis has a wide range of excellent features, esteemed performance heritage, amazingly powerful engine, loads of adjustability in the suspension and a tunable drivetrain, if you want to experiment to tune your Vorza Nitro to your liking.
The 2022 spec Vorza line-up features the same Worlds-conquering design that has beaten the best of the best on the racing track! A full suite of top-level race car features makes sure that you can attack the racing line straight out of the box!
Features:
Factory-assembled & pre-painted 4WD 1/8 scale Car
Pre-painted body with awesome speed graphics
Pre-mounted all-terrain tires
High torque metal geared steering Servo
Nitro Star F3.5 V2 Engine
Full-time 4WD for excellent control
Efficient and tough shaft drivetrain with front universals
16mm Big Bore oil-filled shocks for confident control
4mm aluminum front and rear shock tower
4mm aluminium chassis
Easy-Tune Dual Brake Disc Setup
Cast aluminium engine mount
Composite chassis braces for extra driving feel
Super thick top links
Fuel tank clunk helps engine stay running if car is upside-down
Quick access to all critical maintenance points
Loads of adjustability: roll centre, wheelbase, camber, sway bar and more
Easy radio tray removal for maintenance and cleaning
HD High-Impact composite suspension blocks front and rear
Front and rear sway bars for excellent handling
Hardened steel spur and clutch bell for extreme durability
Spiral-cut bevel gears for the best balance of strength and efficiency
Tough 4-gear differentials
Suspension based on World Championship pedigree
Super low CoG for superior handling
Nylon stone and dirt guards keep rocks out of the chassis
Dual bellcrank steering
Cam type servo saver
All hex head race spec hardware
Full set of rubber-sealed ball bearings
2.4GHz Radio Set with waterproof receiver
WHAT YOU NEED:
20-25% Nitromethane fuel,
Glow igniter, fuel bottle, (#160177 Nitro Starter pack - USB)
RX battery for car (#160153 Plazma 1600mAh NiMH RX battery Pack)
RX battery charger
4 x AA Batteries for Transmitter (#101939 Plazma AA 1.5v Alkaline batteries 4pcs)
Specifications:
